This very rugged XGA automotive video monitor has especially been developed for operating under very harsh environmental conditions as in wheel and chain driven military vehicles.
The tight and very stable housing construction combines IP 65 water protection and operation at increased ambient temperatures.
It provides 2 TNC video-inputs with buffered outputs to connect colour or monochrome cameras complying with PAL- or NTSC-standard. The video signal of the chosen camera is available at an additional TNC connector. Optional the video information may be overlaid with customer defined positioning marks, symbols or cross hair sights.
The video-display can be mounted on a VESA Tripod via 4 shock mounts on upper and lower sides or on the rear. All adjustments like contrast, brightness, signal sources, picture positions, etc. can be done by 4 keys located at the front or via RS232 interface.
Technical specifications
refer to data sheet: 00658
Timing: | CCIR / RS170 |
Display standards: | PAL, NTSC, VGA, SVGA, XGA, (SXGA downscaling) |
Resolution: | XGA 1024 x 768; 8-Bit (16,7 mill. colours/ 256 grey levels) |
Power supply: | 18 Vdc - 36 Vdc according to VG96916-5 |
Signals: | CVBS, Y / C, RGB, TDMS Rx up to 160 MHz |
Synchronization: | up to 85 Hz at SXGA (analogue RGB- input) |
Connectors: | 5 x TNC: ■ camera1 IN; 1 OUT ■ camera 2 IN; 2 OUT ■ selected camera OUT ■ power supply TBD |
Controls: | On / Off Camera 1 / 2 Brightness ″+” and ″-" |
Protection: | IP 65 according to EN 60529 |
Temperature: | -10 °C to +55 °C (operating) -25 °C to +70 °C (storage) |
Brightness: | 1000 cd/m² max. (without anti-glare Filter) |
Dimensions: | 312 x 238 x 50 mm (W x H x D) |
Brightness: | 300 cd/m² (typ.) |
Dimensions: | 312 x 263 x 55 mm (W x H x D) |